14 posts / 0 new / Last post
#1  January 11, 2011 - 5:10pm
fredrich.48381's picture
Offline
Joined: Dec 2010
Posts: 6
Kudos: 0

I followed the procedures to the letter, now it will not get passed the Apple Logo.

  January 11, 2011 - 5:18pm
FotoLexi's picture
Offline
Joined: Dec 2010
Posts: 1
Kudos: 0

Hi

 

I had the same problem, try "Boot Tethered" with Seas0nPass and then DON´T DISCONNECT the Power Plug

Only disconnect the MicroUSB Cable and connect the HDMI Cable

 

 

  January 11, 2011 - 5:20pm (Reply to #2)
rickl.60532's picture
Offline
Joined: Dec 2010
Posts: 18
Kudos: 0

Just did that.  Black screen.

Now did a Menu + Play button and got back to apple...but sitting there no change.

 

  January 11, 2011 - 5:24pm (Reply to #3)
Bluntman's picture
Offline
Joined: Dec 2010
Posts: 15
Kudos: 0

Damn time to get out the extension cord and see if this works....same problems all around. Apple logo, blank, blinky light....nothing.

  January 11, 2011 - 5:31pm
fredrich.48381's picture
Offline
Joined: Dec 2010
Posts: 6
Kudos: 0

Just restored my ATV with iTunes, it's working and back to factory default.  I'll try this one more time.  There is some confusion about the powercord.  The Software does not say anything about connecting it but the instructions on the sight does.  Which is it?

  January 11, 2011 - 5:32pm (Reply to #5)
Bluntman's picture
Offline
Joined: Dec 2010
Posts: 15
Kudos: 0

Hop Crap it worked...yea you can't lose power.

  January 11, 2011 - 5:46pm
fredrich.48381's picture
Offline
Joined: Dec 2010
Posts: 6
Kudos: 0

Nope, bricked again!  Not sure if I'm doing something wrong.  I'm recovering with iTunes again and I'll do some more waiting until this get ironed out.  

  January 11, 2011 - 9:57pm
kylewith's picture
Offline
Joined: Dec 2010
Posts: 2
Kudos: 0

Got it to work by pluging the power cable when iTunes finished and then proceeded to Boot Tether.

ATV powered up and is connected to WIFI.... so far so good.

  January 11, 2011 - 10:46pm
rixvette's picture
Offline
Joined: Dec 2010
Posts: 2
Kudos: 0

It does not work.  I followed the instructions to the letter and I could not get it to work.  I finally had the power cord on and got it to go to iTunes.  Got an error code as it was restoring in iTunes and not iTunes will not recognize it.  Help.  It just should not be this difficult.  

  January 11, 2011 - 11:06pm
rfjjmr's picture
Offline
Joined: Jan 2011
Posts: 1
Kudos: 0

Yes, rixvette -- I'm with you!  It shouldn't be this difficult, especially after FireCore aTV sells itself as easy to install, no USB thumb drives, free beer for everyone, etc.

I have wasted 13 hours, on and off, trying to get this thing to work.

Now I want my money back! Frown

  January 11, 2011 - 11:39pm
Bluntman's picture
Offline
Joined: Dec 2010
Posts: 15
Kudos: 0

Great Job on the quick fix FireCore and Seas0nPass!!! Works great! It's a BETA people there will be problems.

  January 12, 2011 - 5:35am (Reply to #11)
LutzRFrank's picture
Offline
Joined: Dec 2010
Posts: 22
Kudos: 0

Absolutely agreed ... and the pictures on the different steps make it really easy to identify when USB and when Power has to be attached.

Timing is crucial aswell, so please really unplugg USB shortly before trying to boot tethered and watch the type of blinking of the Device.

 

Additionally, fireCore even mentions "Seas0nPass makes this as easy as possible, but please do not proceed unless you are comfortable with this process."

  January 12, 2011 - 6:25am
simonb.310196's picture
Offline
Joined: Dec 2010
Posts: 8
Kudos: 0

If your apple TV just gives you a black screen after tethered boot, just try running the aTV installer again while the screen is blank, this did it for me!

  January 15, 2011 - 2:33pm (Reply to #13)
jasonm.5120's picture
Offline
Joined: Jan 2011
Posts: 3
Kudos: 0

This trick just worked for me as well. Thanks Firecore!!!!