4 posts / 0 new / Last post
#1  January 12, 2011 - 2:38pm
nickm.6643's picture
Offline
Joined: Dec 2010
Posts: 5
Kudos: 0

Hi Guys,

 

I have posted this on another thread but was unsure if it would get touched on, Will repost it here uncase other people are having the same issues.

Had jbed this morning with Seas0nPass 0.6.4, Worked well except for the fact that it was unable to access any packages as most people have found.

Have just been trying 0.6.5, I'm able to install plex over ssh which is good, However I've noticed that now after I do the atv black install nitotv no longer shows up after the lowtide restart.

When trying to do a hard restart I am unable to redo the teathered boot. Always get exploit failed from Seas0nPass then have to re jb the device.

Will be looking forward to some feedback.

  January 12, 2011 - 5:24pm
5stringdeath's picture
Offline
Joined: Dec 2010
Posts: 11
Kudos: 0

BTW, you don't have to SSH install Plex anymore, its been updated:

 

http://forums.plexapp.com/index.php/topic/2240...

  January 13, 2011 - 4:51am (Reply to #2)
nickm.6643's picture
Offline
Joined: Dec 2010
Posts: 5
Kudos: 0

Yeah I just did it via maintenance.

 

Ran the atv black program again and sorted it Smile

  January 21, 2011 - 10:55pm (Reply to #3)
pmcd's picture
Offline
Joined: Nov 2010
Posts: 80
Kudos: 0

Atvflash thinks I have Plex installed when I don't. Is there a way of deleting from maintenance?

 

philip