615 posts / 0 new / Last post
#1  March 12, 2012 - 4:35am
CYBERxNUKE's picture
Offline
Joined: Mar 2012
Posts: 56
Kudos: 0

Should work with any version.. just replace 4.4.4 with your jailbreakable version.

Tools Needed:

AppleTV2,1_4.4.4_9A406a_Restore.ipsw - or alternate ipsw version

Seas0nPass_444.zip - 0.3.52.4905 - Seas0nPass_444.zip(backup)

iFaith-v1.4.2_windows.zip

Total Commader

Dirty Little Video.. less than 3 minutes to do, once you have your ifiath and seas0npass ipsw

http://www.youtube.com/watch?v=MUQfJ6OYhlc

  1. Use IFAITH to "dump shsh blobs" from your official ipsw atv2. disconnect it for now.
  2. Use IFAITH to "build signed ipsw w blobs" (with device still unpluged). BUT DO NOT USE IT to jailbreak. Let it sit down on your desktop.
  3. Use SEAS0NPASS (version 0.3.52.4905, new version will not work) to build custom firmware -right mouse click on ''create ipsw'' and choose your version -(with device still unplugged) BUT DO NOT USE IT to jailbreak. Let it sit down in yours My documents>seasonpass
  4. Download and install TOTALCOMMANDER(wincmd)
  5. Create new folder on desktop
  6. Drag SEAS0NPASS custom ipsw firmware onto TOTALCOMMANDER icon . You shoud see now files of all ipsw file in left side.
  7. In right side of TOTALCOMMANDER navigate to empty folder which you just created.
  8. Mark the only 2 dmg files from left side and drag them to right side, let it extract to that empty folder. (will take a bit)
  9. After extract close total comander.
  10. Drag now IFAITH signed firmware from desktop onto TOTALCOMMANDER icon.
  11. On the left side you should see IFAITH ipsw files,on the right side 2 files extracted in step8.
  12. Mark those 2 files on the right and drag them to left side to IFAITH signed ipsw. Let it overwrite.
  13. After all is done close total comander.
  14. You have now IFAITH firmware ipsw file on your desktop with signed blobs and SEAS0NPASS custom ipsw inside.
  15. Connect your ATV2 to PC , use iReb to enter DFU mode.
  16. After you are in dfu open itunes , press SHIFT +restore and navigate to file on your desktop called as 00000xxxxx_IFAITH_Apple_TV_2-4.4.49A406a_signed.ipsw
  17. Itunes will finish the job , use atv flash and you are done:)

credits to ormanton

 

 

 

 

If all else fails.. try https://rapidshare.com/files/1810177006/sn0wbreeze-v2.9.3.zip   -- i suggest this method.. now.. Tongue

  March 12, 2012 - 4:43am
houst69's picture
Offline
Joined: Feb 2012
Posts: 13
Kudos: 0

As i have said in the previous post at step 2 i download the fresh ipsw but it saves to the iFaith folder within the C drive and it is called AppleTV2,1_4.4.4_9A406a_Restore?? Help

  March 12, 2012 - 4:49am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

Thanks alot but in step2 we have to choose the SP ipsw or the Original 4.4.4?or choose download it for me.thats my concern thanks again

  March 12, 2012 - 4:50am (Reply to #3)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  dkpham wrote:

Thanks alot but in step2 we have to choose the SP ipsw or the Original 4.4.4?or choose download it for me.thats my concern thanks again  

  CYBERxNUKE wrote:

1.Use IFAITH to "dump shsh blobs" from your official ipsw atv2. disconnect it for now.   2. use IFAITH to "build signed ipsw w blobs" (with device still unpluged). BUT DO NOT USE IT to jailbreak. Let it sit down on your desktop.   3. use SEAS0NPASS (version 0.3.48.4144, new version will not work) to build custom firmware (with device still unplugged) BUT DO NOT USE IT to jailbreak. Let it sit down in yours My documents>seasonpass   4. download and install TOTALCOMMANDER(wincmd)   5.create new folder on desktop   6. drag SEAS0NPASS custom ipsw firmware onto TOTALCOMMANDER icon . You shoud see now files of all ipsw file in left side.   7. in right side of TOTALCOMMANDER navigate to empty folder which you just created.   8. mark the only 2 dmg files from left side and drag them to right side, let it extract to that empty folder. (will take a bit)   9. after extract close total comander.   10. drag now IFAITH signed firmware from desktop onto TOTALCOMMANDER icon.   11. on the left side you should see IFAITH ipsw files,on the right side 2 files extracted in step8.   12. mark those 2 files on the right and drag them to left side to IFAITH signed ipsw. Let it overwrite.   13.after all is done close total comander.   14. you have now IFAITH firmware ipsw file on your desktop with signed blobs and SEAS0NPASS custom ipsw inside.   15. Conect your ATV2 to PC , use iReb to enter DFU mode.   16. after you are in dfu open itunes , press SHIFT +restore and navigate to file on your desktop called as 00000xxxxx_IFAITH_Apple_TV_2-4.4.49A406a_signed.ipsw   17. itunes will finish the job , use atv flash and you are done:)   credits to ormanton

choose DOWNLOAD IT FOR ME

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 4:52am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

thanks...hope u can save my life heheh

  March 12, 2012 - 4:53am
CYBERxNUKE's picture
Offline
Joined: Mar 2012
Posts: 56
Kudos: 0

i'll post images. see if that helps.

 

That which is, is often forgotten, and that which has not, will remain forever.

  March 12, 2012 - 4:53am
houst69's picture
Offline
Joined: Feb 2012
Posts: 13
Kudos: 0

I'm still not getting the file name in step 16!?

  March 12, 2012 - 4:55am (Reply to #7)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0

 

  houst69 wrote:

I'm still not getting the file name in step 16!?

 

it will be the same file which you got in step 2 but already modified.

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 4:55am
chucktaylor76's picture
Offline
Joined: Mar 2012
Posts: 7
Kudos: 0

Hi there,

 

Can someone please tell me where I can get older seasonpass from to make this work.

 

Thank you

  March 12, 2012 - 4:56am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

Any link to download Seas0npass version 0.3.48.4144 thanks

  March 12, 2012 - 5:00am (Reply to #10)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  chucktaylor76 wrote:

Hi there,   Can someone please tell me where I can get older seasonpass from to make this work.   Thank you

 

https://rapidshare.com/#!download|149tl4|4058877587|Seas0nPass_444.zip

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:02am
chucktaylor76's picture
Offline
Joined: Mar 2012
Posts: 7
Kudos: 0

Thank you

  March 12, 2012 - 5:10am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

Thanks alot bud

step 4 to 9 seems a bit challenge for me..cause i never use total commander before...cross my finger...heheh

  March 12, 2012 - 5:14am
REALDEAL's picture
Offline
Joined: Mar 2012
Posts: 20
Kudos: 0

your a star m8, thanx Done Can confirm jb done just installing nitotv and Xbmc , dont expect any issues  Smile

  March 12, 2012 - 5:21am (Reply to #14)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  REALDEAL wrote:

your a star m8, thanx Done Can confirm jb done just installing nitotv and Xbmc , dont expect any issues  Smile

U R welcome, enjoy Innocent

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:29am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

Well done baby ur master....hehehe just wonder i have 3 ATV2 now...already done for 1 if i want to do for another one can i start at any step or i have to delete everything on desktop and C: Ifaith also? thanks

  March 12, 2012 - 5:32am (Reply to #16)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  dkpham wrote:

Well done baby ur master....hehehe just wonder i have 3 ATV2 now...already done for 1 if i want to do for another one can i start at any step or i have to delete everything on desktop and C: Ifaith also? thanks

start from step 1, as you need unique shsh blobs for each atv .

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:33am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

thanks how ab the C:ifaith do i have to delete also?

  March 12, 2012 - 5:33am
houst69's picture
Offline
Joined: Feb 2012
Posts: 13
Kudos: 0

I am still not getting the file name at step 16? what am I doing wrong?

  March 12, 2012 - 5:37am (Reply to #19)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  houst69 wrote:

I am still not getting the file name at step 16? what am I doing wrong?

if you had file after step 2, you will have it after step16 the same but modified. it will be the same file with injected 2 dmg files from seasonpass. read&do don't think Smile

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:38am (Reply to #20)
CYBERxNUKE's picture
Offline
Joined: Mar 2012
Posts: 56
Kudos: 0
  houst69 wrote:

I am still not getting the file name at step 16? what am I doing wrong?

 

 

on this step pretty much, is the installing ipsw from itunes to your apple tv.

go into DFU mode with ireb. then you click SHIFT button on keyboard and click restore.

 

 the file you install should look something like this. 000000xxxxxxxxxx_iFaith_Apple_TV_2-4.4.4 (9A406a)_signed.ipsw with x's being your serial number for you apple tv.

That which is, is often forgotten, and that which has not, will remain forever.

  March 12, 2012 - 5:40am (Reply to #21)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  dkpham wrote:

thanks how ab the C:ifaith do i have to delete also?

fresh is best:) delete it , to not get confused.

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:45am
nostre's picture
Offline
Joined: Mar 2012
Posts: 51
Kudos: 0

thank you i will try with 4.4.3 (its the same way with other fw files) i think it will work :>

  March 12, 2012 - 5:45am
dkpham's picture
Offline
Joined: Mar 2012
Posts: 30
Kudos: 0

Thanks just wonder where can i find C:ifaith...after delete all files on desktop now i cant find it on C: ehehe

  March 12, 2012 - 5:47am (Reply to #24)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  nostre wrote:

thank you i will try with 4.4.3 (its the same way with other fw files) i think it will work :>

it will! wil work with all versions up to 4.4.4 in the same way.

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:48am (Reply to #25)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  dkpham wrote:

Thanks just wonder where can i find C:ifaith...after delete all files on desktop now i cant find it on C: ehehe

it gets deleted by it self after ifaith is closed Smile Innocent

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:49am
magicherbz's picture
Offline
Joined: Mar 2012
Posts: 15
Kudos: 0

i keep on getting stuck in ifaith "waiting for apple tv "

  March 12, 2012 - 5:49am
eddy101's picture
Offline
Joined: Mar 2012
Posts: 3
Kudos: 0

help pls...

i have just got an atv2 at 4.4.1 - would this 4.4.4 process work for 4.4.1 also?
i have downloaded the Seas0nPass_444.zip and it lets me right click on create ipsw and pick 4.4.1 - it downloaded the stock ipsw and created SP ipsw files.
please let me know - like to avoid ending up with a brick and force to restore to 5.1.

Also there is a way i can upgrade my atv2 to stock 4.4.4, so i can have JB 4.4.4 ??

 

 

 

  March 12, 2012 - 5:50am (Reply to #28)
ormanton's picture
Offline
Joined: Feb 2009
Posts: 418
Kudos: 0
  magicherbz wrote:

i keep on getting stuck in ifaith "waiting for apple tv "

close it and go to next step

2008-atv1
2011-atv2
2012-atv3 (getting dusty waiting for a miracle)

  March 12, 2012 - 5:52am
chucktaylor76's picture
Offline
Joined: Mar 2012
Posts: 7
Kudos: 0

Hi again,

 

My apple tv 2 was updated to 5.1 so I cant get blobs is there anyway around this?

  March 12, 2012 - 5:54am (Reply to #30)
CYBERxNUKE's picture
Offline
Joined: Mar 2012
Posts: 56
Kudos: 0
  eddy101 wrote:

help pls...

i have just got an atv2 at 4.4.1 - would this 4.4.4 process work for 4.4.1 also?

i have downloaded the Seas0nPass_444.zip and it lets me right click on create ipsw and pick 4.4.1 - it downloaded the stock ipsw and created SP ipsw files.

please let me know - like to avoid ending up with a brick and force to restore to 5.1.

Also there is a way i can upgrade my atv2 to stock 4.4.4, so i can have JB 4.4.4 ??

 

 

should work with 4.4.1. just make sure your working with all 4.4.1 files.

not sure what would happen if you use different files.

I will actually try this in a while. ill report back.

 

That which is, is often forgotten, and that which has not, will remain forever.